>
>
2024-09-01
NO.1 The surface treated with heat treatment and acid washing after hot rolling is generally used for cold-rolled materials, industrial tanks, chemical industrial equipment, etc.
NO2D. Non glossy cold-rolled products obtained by heat treatment and acid washing after cold rolling. Used for automotive parts, building materials, pipes, etc.
The product of NO.2B after quenching and tempering rolling has better glossiness and flatness than the surface of NO.2D. After adopting surface treatment to improve mechanical properties, it almost meets all applications.
Products produced by grinding belts numbered 100 to 120 have excellent glossiness and discontinuous coarse patterns. They are used for building interior and exterior decoration materials, electrical products, and kitchen equipment.
NO.4 products ground with 150-180 grit grinding belts have better glossiness, discontinuous coarse lines, and finer stripes than NO.3. Used for baths, interior and exterior decoration materials of buildings, electrical products, kitchen equipment, and food equipment.
#The product ground with 320 grit grinding tape has better glossiness, discontinuous coarse lines, and finer stripes than NO.4. Used for baths, interior and exterior decoration materials of buildings, electrical products, kitchen equipment, and food equipment.
HL NO.4 is a product that generates grinding patterns through continuous grinding with an appropriate particle size polishing sand belt (subdivided into grades 150-320). Mainly used for architectural decoration, elevators, building doors, panels, etc.
The product obtained by applying bright annealing to BA after cold rolling and smoothing has excellent surface glossiness and high reflectivity, like a mirror surface. Used for household appliances, mirrors, kitchen equipment, decorative materials, etc.
Contact Us at Any Time
